Qootec NVME gen3 x4 SSD - High-Speed Storage Solution

What is Qootec NVME gen3 x4 SSD - High-Speed Storage Solution？

Qootec NVME gen3 x4 SSD - High-Speed Storage Solution is consumer grade M.2 (NGFF) NVMe SSD and mini size 22mm width and 80mm length, it use 3D TLC NAND with 1500 P/E cycle , and working temperature range is 0~70℃, Max. capacity can reach 2TB, Read and write performance can reach 3500/3200MB/s, it’s stable data storage solution for common desktop and laptop. 

How is Qootec NVME gen3 x4 SSD - High-Speed Storage Solution manufactured?

The production process of Qootec NVME gen3 x4 SSD - High-Speed Storage Solution can generally be divided into the following steps:

1. SMT Placement: Surface Mount Technology (SMT) is used to quickly install electronic components onto the PCB (Printed Circuit Board).

2. Card Initialization: The SSD controller is initialized, protocols are written, and the SSD is formatted to be ready for use.

3. Read/Write Speed Testing: Benchmark testing is conducted on the formed SSD to screen for performance.

4. OS Copying (Clone): Operating systems or necessary software are copied to the SSD.

5. Power Cycling Test: Non-normal power-off tests are conducted to ensure the safety of the SSD.

6. Aging Test(Burn-in Test): The product is run under high pressure and high load to test its reliability and stability.

7. Full Disk Test: The product undergoes a full disk write to ensure stable operation.

8. High-Low Temperature Test: Set SSD working temperature to 0~70℃ and check the SSD working status, ensure it can work stable in end users’ equipments.

9. Bad Block Checking: A bad block scan is performed to ensure unhealthy products do not enter the market.

10. Vibration Test: The solidity of the PCB solder joints is tested.

11. Re-initialization: May involve re-initializing or reformatting.

12. Final Full Disk Test: The final full disk inspection process is conducted.

13. Final Product Packaging: The tested SSDs are packaged.

14. OQC Inspection: Quality inspection before shipment.

Warehouse Storage and Shipping: The finished products are stored in the warehouse and prepared for shipping.

The entire production process requires a high standard of environmental control, typically carried out in a clean room to prevent contamination. In addition, the production process includes strict quality control and performance testing of the finished products to ensure their reliability and performance.

What are the application of Qootec NVME gen3 x4 SSD - High-Speed Storage Solution?

Qootec M.2 NVMe TLC SSD can be used in below industry:

1. Desktop

2. Laptop (Ultra Book, common notebook)

3. Gaming 

Why Choose Qootec M2  22X80mm NVMe SSD Gen3x4 QM2E3LM20XXXC ?

Qootec is China the best SSD manufacturer & factory, because we have below advantages:

1. Products quality is guaranteed. Consumer SSD and DRAM failure rate less than 0.5%, Commercial and Industrial SSD and DRAM less than 0.1%, and we give 3 years warranty to all of our products.

2. We own factory and can control production process, so the quality and lead time is under control.  Samples and small order(Less than 500pcs) can be shipped in 3 days, 10k~20k order can be shipped in 10 working days usually(except special condition such as force majeure like COVID 2019) 

3. Great material suppliers. Due we focus on SSD and DRAM for 10 years we have stable NAND flash, controller and other important components suppliers that can supply goods to us more reliably also with lower cost than others.

4. Excellent Service. No matter Pre-sales or In-sales, even if After-Sales, our sales will be online 7 days 12 hours each week (Including weekend).

5. Good policy to our distributors. Micro Storage will hold activity or sponsor our distributors in worldwide according to the sales volume annually.